Imitation stone PC brick is a type of prefabricated concrete brick, which is a rough faced brick mainly composed of pigments such as lychee complexion, red, yellow, etc. Imitation granite bricks are bricks that mimic granite, marble, and other materials. The bricks produced have the same texture and color pigments as granite, are low in price, environmentally friendly, and are one of the green building materials. Imitation stone PC bricks and imitation granite bricks are both artificial human bricks. The following shares the method of laying imitation stone PC bricks.
1. Lay curb tiles or perform edge treatment around the area where the imitation stone PC bricks need to be laid with square tiles.
2. Remove the surface loose soil in the area, then excavate to the corresponding depth according to the thickness of the square bricks and compact the entire area by vibration.
3. Lay a layer of 30-50mm medium coarse sand, and then compact and vibrate it. If heavy vehicles frequently pass through the area, a layer of gravel should be laid underneath the sand layer as the base layer.
4. After laying the imitation stone PC bricks in the entire area, fill the joints with sand and compact them again by vibration.

Imitation stone PC bricks are all designed to produce products that replace natural stone and have better quality than natural stone. Imitation stone pc brick is widely used in the pavement of ground garden road, including tactile paving brick and drain cover plate.

Editor: ZiYu